23
Rerode R1 / R1+ Display Functions Guide
Knowledge Base Article
This guide explains how to use and configure the display functions on the Rerode R1 and R1+ using the Rerode mobile app. Follow along with the reference video for a full visual walkthrough.
What You’ll Need
Before starting, make sure you have:
• Your Rerode R1 or R1+ bike
• The Rerode mobile app installed on your phone
• Bluetooth enabled on your phone
• Bike powered on
Connecting the Bike to the Rerode App
-
Power on the bike.
-
Open the Rerode app on your phone.
-
Enable Bluetooth if prompted.
-
Select your bike from the available devices.
-
Wait for the app to confirm connection.
Once connected, you can access and configure display settings.
Display Overview
The R1 and R1+ display provides key riding information, including:
• Current speed
• Battery level
• Ride mode / power mode
• Trip distance
• Total mileage (odometer)
• System status or warnings
The display updates in real time while riding.
Adjusting Display Settings in the App
After connecting in the app, you can adjust settings such as:
Ride Mode & Power Settings
Choose different power or riding modes depending on terrain or rider preference.
Speed & Power Limits
Set speed or power limits where required for training, new riders, or local regulations.
Units & Display Preferences
Switch between MPH/KPH and adjust display preferences depending on rider preference.
Security & Lock Features
Viewing Ride Data
The app and display allow riders to monitor:
• Trip distance
• Ride time
• Battery usage
• Total mileage
This information helps track usage and maintenance intervals.
Troubleshooting Connection Issues
If the app does not connect:
• Make sure the bike is powered on
• Restart Bluetooth on your phone
• Close and reopen the app
• Move closer to the bike
• Restart the bike and try again
Reference Video
For step-by-step instructions, watch the reference video included in this knowledge base article. The video shows exactly how to connect, navigate settings, and use display functions.
Rerode R1 / R1+ Display Functions Guide Video
Summary
The display and Rerode app allow riders to monitor bike performance, adjust settings, and customize the riding experience. Once connected, most adjustments can be handled quickly through the app.
